Aviation Safety Inspector (Operations) (Fleet Training Program Manager)

The Fleet Training Program Manager (FTPM) serves as the primary operations interface between the training center, its training center evaluators (TCEs), ground/flight instructors, and the Federal Aviation Administration (FAA).

Qualifications OPM General Schedule Qualification Standards for Aviation Safety Series, 1825 General Requirements for All Positions: Not more than two separate incidents involving Federal aviation regulations violations in the last 5 years; Valid State driver's license; Fluency in the English language; No chemical dependencies or drug abuse that could interfere with job performance; and High school diploma or equivalent Medical Requirements for All Positions: Applicants must be physically able to perform the duties of the Aviation Safety Inspector position in a safe and efficient manner, with or without a reasonable accommodation, and must meet all of the following requirements: Have good distant vision in each eye and be able to read, without strain, printed materials the size of typewritten characters (glasses and contact lenses permitted); Have the ability to hear the conversational voice (hearing aid permitted); and Not have any physical condition that would cause them to be a hazard to themselves or others that would interfere with their ability to fly as passengers in a variety of aircraft. When the predominant work involves general aviation operations, applicants for Aviation Safety Inspector (Operations) positions must meet all of the following requirements. Valid, unexpired Flight Instructor Certificate with single and multi-engine airplane and instrument airplane ratings. Must have given a minimum of 200 hours of flight instruction in an aircraft. Professional flying skill as demonstrated in a flight check to Commercial Pilot Certificate with an instrument rating; Possession of Airline Transport Pilot Certificate or Commercial Pilot Certificate with instrument airplane rating. Minimum of 100 flight hours within the last 3 years. Minimum of 1,500 total flight hours. Possession of single and multi-engine land airplane ratings. Not more than 2 flying accidents in the last 5 years in which the applicant's pilot error was involved. Possession of a valid second-class FAA medical certificate. When the predominant work involves air carrier operations, applicants for Aviation Safety Inspector (Operations) positions must meet all of the following requirements. At least 1 year of pilot experience in multi-engine aircraft of more than 12,500 pounds maximum certificated takeoff weight; Not more than 2 flying accidents during the last 5 years in which the applicant's pilot error was involved; Professional flying skill as demonstrated in a simulator check to Airline Transport Pilot Standard. Minimum 100 flight hours during the last 3 years; Airline Transport Pilot Certificate or Commercial Pilot Certificate with instrument airplane rating (Department of Navy positions require pilot experience as demonstrated by previous ATP level performance in large multi-engine airplanes and helicopters); Possession of a valid second-class FAA medical certificate (For positions within the Department of Navy, applicants must also be physically qualified to ride as an observer aboard squadron aircraft. In addition, must also meet physical requirements to travel and lift heavy objects while performing mishap investigations); and Minimum 1,500 total flight hours. This position does not require a 2nd Class Medical. Incumbent will not be required to participate in the 4040 EBC Flight Program involving the use of airplanes. The incumbent will participate in the 4040 Flight Program limited to flight currency in simulators representative of his/her assigned fleet programs. In addition to the above requirements, applicants for this position must demonstrate in their application that they possess at least one year (52 weeks) of specialized experience equivalent to the (FV-I, FG/GS-13) level. Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to perform successfully the duties of the position and is typically in or related to the work of the position to be filled. Specialized experience is defined as: experience assisting, conducting, or performing various technical functions related to certification, surveillance, investigation, and enforcement activities. Additional experience may be in investigating and reporting on accidents, incidents, and violations. For Lateral Movements Between 1825 Specialties: To assist in determining qualification requirements, applicants transferring between specialties at the same grade level are strongly encouraged to complete the appropriate Qualifications Assessment Tool (QAT) check sheet and upload it along with their resume. Check sheets are contained in Order 3410.26, Flight Standards Service Air Carrier and General Aviation Qualifications Assessment Tool for AFS Aviation Safety Inspectors. The recency of specialized experience is waived for current and former FAA employees in the 1825 series. Applicants should include examples of specialized experience in their work history. Qualifications must be met by the closing date of this vacancy announcement. Errors or omissions may impact your rating or may result in you not being considered for the job.